ABOUT US : MORE HEATERS : HEATER SIZE CALCULATION : LEASE FORM (£1500 min) : FLUE SYSTEM ADVICE
- Automatic Ignition Model - automatic pre-heating of used oil
- A high capacity axial fan draws air from the workshop and expels a 8100 cu m/hr heated air flow into the building
- In summertime, the heater fans can be used for ventilation only - 8100 cu m/hr cool recirculated air flow
- Three Swivel Exit Heads to direct air flow
- Operate using waste oil from diesel or petrol engines, gearboxes, transmissions, hydraulic systems, diesel oil or any combination of these. The following must not be used; solvents, thinners, petro-chemical based oils, transformer oil or any oil above SAE 90.
- Can also operate from diesel oil, or heating oil only
- Full combustion is achieved using a compressed air assisted burner. This system does not produce any unpleasant smell or smoke and the emissions from the flue stack are well below permitted contamination levels.
- This heating technology permits the end user to recover the investment costs, possibly within one heating season, because of the savings made from using waste oil instead of a more expensive fuel oil.
- Voltage : 400V 3-phase
- Max Heat Output :390,00 BTU/hr (actual maximum will depend on type of waste oil used)
- Heated Air Flow : 8100 cubic metres/hour
- Fuel Consumption : approx 12.8 litres/hr
- Day Tank Capacity : 130 litres
- Dimensions : 900 W x 2060 D x 2175 H
heater order code : R096.6008
standard flue pipe kit : R018.3005
additional flue pipes are available
view
prices
REGULATIONS ON BURNING WASTE OIL
Scotland - England & Wales - Northern Ireland
Waste Oil Heaters should not be operated until they have been registered with the relevant Local Authority
